I do not have much experience with PIC programming, but I understand that the error is occurring on the very first line of my hex file, and I think 3FFF means "blank".
I was able to successfully write to 2 different PIC chips that did not require UV erasing, but I am not sure how to resolve this error.
A hardware test in WinPic shows that my hardware is connected ok.
Any help/advice would be greatly appreciated!
El administrador ha deshabilitado la escritura de mensajes a los usuarios no registrados.
Re:PIC16C65A errors
por :
sispic
Fecha : 2012/01/12 21:28
Administrador
Admin
Mensajes: 424
can check the voltage in the socket, there is a hardware configuration for each signal check. regards
El administrador ha deshabilitado la escritura de mensajes a los usuarios no registrados.
Re:PIC16C65A errors
por :
nabontra
Fecha : 2012/01/13 23:38
Usuario
Fresh Boarder
Mensajes: 2
I'm sorry but my PIC programming experience is quite limited, do you mean to check the voltage in the 40pin ZIF? What kind of voltage should I be looking for?
I am using this datasheet as a reference for the PIC16C65A:
![GTP-USB [ plus ]](http://www.winpic800.com//images/stories/con_.jpg)
